Designing the Demons

Continuing on from my initial concept with Kasdeia and how she could summon demons I began drawing out ideas heavily influenced by Chris Ryniaks work. These would be the demons in their summoned form however, I wanted to look into the way they would appear before taming. Along with altering designs from concepts I had already viewed I worked on my own.  The first of these was the idea of a giant toad/ frog creature I was struggling to create a creature that looked fierce enough therefore referenced one I had already found and altered different aspects of this along with merging matte painting techniques.

The second of my designs was that of a leviathan, not those shown within the Final Fantasy series however, more of a biblical type. Again, I used ideas from Chris Ryniak’s work to influence me when designing out the summoned demons. The following step was to draw out the not tamed idea of the leviathan this was another concept where I took aspects from my references and blended it in with a final idea, I feel like this is a downside to the first two concept pieces as more of my own influence could have gone in to them.

The following concept was for a demon rodent or small creature, the idea I chose to go for was a hamster as its so controversial as to the idea of scary.  I found it difficult to find a reference picture for the proportions of this however, after some time I found a suitable image for me to base my drawing off. From this image I then added in slightly more threatening features such as sharper teeth and green slime finally finished by a extruding tongue. The fear aesthetics of this creature came from a mimic in the dark souls series.

The final and what I believe to be the most successful in the concepts was that of the sabre tooth demon god. I wanted this to be one of the main demons that Kasdeia used if not had summoned on a permanent basis. For the idea of godlike I gave it tendrils either side of its face that harnessed magical powers. Although similar to whiskers in there placement they where more like sensors. The inspiration for this idea came from the Coeurls within Final Fantasy XV and how they used the tendrils to charge and harness lightning powers. The main feature of the demon was the sabre tooth face and body. For this I searched for both 3d models and fossilised references. Overall I believe this was the more successful of the concepts and is the one I will be taking forward over others.

Link to time lapse video of sabre tooth god: https://www.youtube.com/watch?v=HGur_gMD-lg

 

Developing the Concepts.

from previous drawn concepts and thumbnail work I began converting and expanding ideas within Photoshop hoping to finalise on a style. For the first of these concept piece I used a fashion model to roughly get the human anatomy then refined this further. Making sure to work in separate layers throughout the work flow. I ensured that the outfit idea was on its own layer, the same went for the hair and other aesthetics such as tattoos/ branding.  KasdeiaRavadaVersion1 Not putting too much focus on the initial design ideas I used block colouring. As for the main focus of this concept a range of techniques where used. Again, I ensured the various parts; line work, block colours, light angles and shading had there own layers.  The drawing took roughly around 3 hours to complete not including any tweaking for the shading I used the size 17 chalk brush as I feel this has best airflow and blending. Unfortunately this brush didn’t work too well in terms of the armour or dress rather than using a brush that blends well I should have used a fine detail one able to capture the rustic feeling of Kasdeia’s clothing. To add in the fantasy elements and reinforce that she was a demon tamer I took inspiration from Chris Ryniaks morning scribbles series and altered the design briefly. In a later piece when working out the demons this would developed on further.  As a subtle detail to bring the finalised concept on her appearance together I used a smoke brush on low transparency and changed the colour to a soft cyan in order to reflect the mysterious notion of summoning demons.

Other conceptual pieces I carried out during this stage included refining the poses that I would later be sculpting Kasdeia around to make these poses more interesting I gave Kasdeia different weapons and demons ensuring to keep them relative to the poses she was in.

From the three poses the combat where she is using the whip had to be my favourite as it captured how fierce of a fighter the character is alongside reinforcing her backstory of being forced as an animal tamer.

References I used within these pieces include:

This slideshow requires JavaScript.

Character Conceptualizing

before heading into backstory for my character I chose to sketch out fast thumbnail designs on Photoshop using a pen pressure controlled transparency. I chose to do this to get a rough idea on the character I ended up creating and others that could push ideas within the future. As a time limit and to loosen myself up i gave myself a set time of 30 seconds for each thumbnail. In doing so I was allowing my hands to loosen and not to think too much on the brush strokes I was creating. Having already studied life drawing prior and having brief understanding on how human anatomy was I saved time in not looking at reference images.

characterthumbnails

A lot of the same designs started reflecting in each new thumbnail with ideas then bouncing from one another resulting in me knowing further the type of character I wanted to create. The next step was to devise a background for the character as well as details such as name, age and appearance.  Drafting this out a few times the final result was that she would be a Demon Tamer, 25 years old and that her name would be Kasdeia Ravada.  The full in depth back story is below.

KasdeiaBackstory

It was then from the backstory that I began drawing out more detailed concepts first by hand then transferring the styles and elements digitally all the meanwhile using references to help me along the way.  Initially within my hand drawn concepts I depicted Kasdeia with the faun like ears from a young age rather than something she was given.  It was playing with this idea though that helped me within developing the back story.

18698151_692604027590173_3372229283356809232_n This was the hand drawn idea within my sketchbook initially the idea was to make her look mysterious even as a child however, i felt this didn’t reflect her persona or the troubles she was going through. I also started writing notes along my work a small example of this can be seen on this concept where I’ve commented on removing the ears.

Next to this I also began in drawing out the various poses from basic zsphere models I created within Zbrush. From these poses i could then develop further by adapting them digitally and making a skin to sculpt with.

 

Matte Painting

During the process on coming up with a character concept I was presented with the task of creating a matte painting to place my character in. Before working on my own from concept pieces I followed a tutorial based on Machu Picchu and how to expand a high angled wide shot. The software I used in order to carry this out was Photoshop CS6. This was the base image I was given.

machupicchu I didn’t want to strictly follow the tutorial so added in my own elements and found a lot of inspiration from Asgard within the Thor films. The first step among this process was to sketch out a rough idea of what I wanted to create using the given image as a basis on composition.  I chose to keep it simple to begin with extending the mountains within the distance and bring a cliff edge together in the foreground. I started painting in the sky with a soft brush using a basic gradient of dark blue at the top of the sky fading into a softer blue along the lower horizon line from here I began painting in clouds and blocking of colours using the Idropper tool to gain as close to the pre-exsiting spectrum as possible the Idropper tool was used heavily throughout the matte painting in order for me to make it as realistic as possible.  This process was carried out throughout the majority of the painting until the surrounding negative space was filled. Following on from this I chose to add in spire like features attached down with chains as well as a distant waterfall this required some rearrangement of the composition however, didn’t take much longer to fix. The next steps involved adding in the finer details for this I had to zoom in and make light brush strokes following the pathways other trees, cracks and grass where following although I believe this was carried out successfully more time could have gone into this at a later stage to again make the image more detailed.  after finishing off the finer details I then again decided to change to composition of the image more so the left side rather than having a sloping mountain edge I decided to make this into a sharp cliff edge with various drop offs. Overall I felt this worked out better however, more could be done to the image in order to gain a more professional result and is something I will be taking into consideration during my main matte painting along with any others I am tasked with during future projects.

This slideshow requires JavaScript.

Environment Design; Group Project

TechDoc17_03_17 Document Reviewing the process and methods used within recent project on environment design.

Turn Around of the library building:

Single Shot Renders: